1 ton to 10 ton kaphethiloli kagesi weforklift kadizili
incazelo yemikhiqizo
Ama-Forklift yizimoto ezisebenza ezimbonini, ezibhekisela ezimotweni ezihlukahlukene ezinamasondo ezithwala, ukuthulula, ukupakisha kanye nokuthutha amabanga amafushane wezimpahla ezinamaphalethi. Ivame ukusetshenziselwa ukuthuthwa kwezinto ezinkulu ezigcinwe, futhi ngokuvamile iqhutshwa izinjini zamafutha noma amabhethri.
Sinikezela ngamaforklift edizili, amaforklift kaphethiloli namaforklift kagesi:
XCMG 1.5T Dizili Forklift FD15T
I-FD series forklift yedizili ikunikeza ukukhetha okuningi ngokwesidingo sakho sangempela, sinezinjini ezithembekile ezihlukile ongakhetha kuzo. Injini yakhelwe ngokukhethekile ukusetshenziswa kwe-forklift, esebenzisa uphethiloli ophansi, umsindo omncane nokudlidliza, zonke lezi zici zithuthukisa ukusebenza kwe-forklift.
Izinzuzo kanye nokugqamisa:
Ucezu olulodwa oludizayinelwe uhlaka olumisiwe.
Ithangi lamanzi elisha nesistimu yokupholisa.
Isikhala esikhulu sokusebenza.Isondo lokuqondisa elilungiselelwe, isibambo sokusebenza namaphedali.
Isistimu ye-hydraulic esebenza kahle kakhulu, ukusetshenziswa kukaphethiloli okuphansi.
Insika yokubuka ebanzi ethuthukisiwe ithuthukisa ukusebenza kahle nokuphepha kokusebenza.
| Imodeli | Iyunithi | I-FD15T-I | I-FD15T-JB | I-FD15T-JC |
| Uhlobo lwamandla | Udizili | |||
| Isilinganiso Somthwalo Wokuthwala | kg | 1500 | ||
| Isikhungo Sokulayisha | mm | 500 | ||
| Kukalwe Ukuphakama Kwama-Lift | mm | 3000 | ||
| Khulula Phakamisa Ukuphakama | mm | 100 | ||
| Usayizi Wemfologo (L×W×T) | mm | 920×120×35 | ||
| I-Mast Tilt angle (F/R, α°/β°) | deg | 6°/12° | ||
| I-Fork Overhang (Isikhungo Sesondo Sobuso Bemfoloko) | mm | 409 | ||
| I-Rear Overhang | mm | 450 | ||
| Ubude obubheke ebusweni bemfologo (Ngaphandle kweFork) | mm | 2250 | ||
| Ububanzi Bebonke | mm | 1090 | ||
| I-Mast Yehlisiwe Ukuphakama | mm | 2025 | ||
| I-Overhead Guard Height | mm | 2180 | ||
| Irediyasi Ejikayo (Ngaphandle) | mm | 2030 | ||
| Isivinini Sokuhamba (Akukho mthwalo) | km/h | 14.5 | ||
| Isivinini Sokuphakamisa (Umthwalo Ogcwele) | mm/isekhondi | 560 | ||
| I-Front Tread | mm | 890 | ||
| I-Rear Nyathela | mm | 920 | ||
| I-wheelbase | mm | 1410 | ||
| Isisindo Esiphelele | kg | 2590 | ||
| Ibhethri | V/Ah | 12/90 | ||
| Imodeli Yenjini | I-NB485BPG | I-C240PKJ30 (EuⅢ) | I-4TNE92 (EuⅢ & EPAⅢ) | |
| Umkhiqizi Wenjini | XINCHAI | ISUZU | YANMAR | |
I-3T Diesel Forklift FD30T
| Imodeli | I-FD30T-E | I-FD30T-A | I-FD30T-F | I-FD30T-JB | I-FD30T-JE | I-FD30T-JM | I-FD30T-JD |
| Uhlobo lwamandla | Udizili | ||||||
| Isilinganiso Somthwalo Wokuthwala | 3000kg | ||||||
| Isikhungo Sokulayisha | 500mm | ||||||
| Kukalwe Ukuphakama Kwama-Lift | 3000 | ||||||
| Khulula Phakamisa Ukuphakama | 100mm | ||||||
| Usayizi Wemfologo (L×W×T) | 1070×125×45mm | ||||||
| I-Mast Tilt angle (F/R, α°/β°) | 6°/12° | ||||||
| I-Fork Overhang | 484 mm | ||||||
| I-Rear Overhang | 595 mm | ||||||
| Ground Clearance | 145 mm | ||||||
| Ubude Bobuso Bemfoloko | 2773 mm | ||||||
| Ububanzi Bebonke | 1225 mm | ||||||
| I-Overhead Guard Height | 2235 mm | ||||||
| Irediyasi Ejikayo (Ngaphandle) | 2450 mm | ||||||
| Isivinini Sokuhamba (Akukho mthwalo) | 19km/h | ||||||
| Isivinini Sokuphakamisa (Umthwalo Ogcwele) | 430mm/isekhondi | 410mm/isekhondi | |||||
| Ukwehlisa Isivinini (Umthwalo Ogcwele) | 450mm/isekhondi | ||||||
| I-Max.Gradeability (Umthwalo Ogcwele) | 20% | ||||||
| Isondo (Phambili x 2) | 28×9-15-12PR mm | ||||||
| Isondo (Ngemuva x 2) | 6.50-10-10PR mm | ||||||
| Isisindo Esiphelele | 4340kg | ||||||
| Ibhethri | 12/90V/Ah | ||||||
| Imodeli Yenjini | I-A498BT1-35 | I-C490BPG-237 | I-C490BPG-37 | I-C240PKJ30 | 4TNE98 | I-Mitsubishi S4S(EuⅢ) | I-4TNE94(EuⅢ) |
| (EuⅢ) | (EuⅢ) | ||||||
| Umkhiqizi Wenjini | XINCHAI | XINCHAI | XINCHAI | ISUZU | YANMAR | I-Mitsubishi | YANMAR |
1 ton Electric Smart Stacker Forklift XCS-PW12
• Uhlelo olugcwele lwe-AC
• Uhlelo lwe-OPS (Uhlobo lokuhlala)
• Isistimu yokuqondisa ye-EPS • Isistimu ye-Electromagnetic Braking
• Ukusetshenziswa Kwamandla Aphansi • Isibonisi sika-opharetha esifundeka kalula
• Usizo System ukuze uvumelane esimweni sakho ethize yokusebenza design Ergonomic kanye nokusebenza okusezingeni eliphezulu osekelwa innovative ubuchwepheshe ukusiza XCMG ukufinyelela amaloli abe isixazululo esiphelele isicelo ezihlukahlukene. Ukuthi isetshenziswa ekusebenzeni kuphalethi, ukushayela udlulele noma ku-drive-in racking. Kungakhathaliseki ukuthi izindawo eziwumngcingo noma izindawo ezicacile eziphansi. Iloli yokufinyelela ye-XCMG izohlala ingumsizi wakho omuhle ekupakisheni.
| Imodeli | I-XCS-PW12 | ||
| Umthamo olinganiselwe | Q | kg | 1200 |
| Ibanga eliphakathi nendawo | C | mm | 600 |
| Imodi yamandla | I-AC Motor | ||
| izinga lebhethri | 2VBS | ||
| Uhlobo lwesondo | PU | ||
| Usayizi | |||
| Ubude bensika eyehlisiwe | h1 | mm | 2301 |
| Ukuphakama okuphezulu | h3 | mm | 3530 |
| Ukuphakama kwensika okunwetshiwe | h4 | mm | 4088 |
| Ibanga lokulayisha, isikhungo se-axle yokushayela ukuya kufoloko | X | mm | 647 |
| Isisekelo samasondo | y | mm | 1248 |
| Ubukhulu obungeziwe bamasondo | xw | mm | 150x54 |
| Nyathela, phambili | b10 | mm | 522 |
| Nyathela ngemuva | b11 | mm | 390/505 |
| Ukuphakama kwe-handel | h14 | mm | 850/1385 |
| Ubude, behlisiwe | h13 | mm | 90 |
| Ubude | l1 | mm | 1919 |
| Ubude obubheke ebusweni bezimfoloko | l2 | mm | 769 |
| Ububanzi | b1 | mm | 820 |
| Ubukhulu bemfoloko | s/e/l | mm | 60/180/1150 |
| Ibanga phakathi kwezingalo zemfoloko | b5 | mm | 570/ 685 |
| Irediyasi encane | Wa | mm | 1440 |
| Ukusebenza | |||
| Isivinini sokuhamba silayishiwe/asilayishiwe | km/h | 6.0 / 7.0 | |
| Ijubane lokuphakamisa, lilayishiwe/alayishiwe | m/s | 0.09/ 0.14 | |
| Ukwehlisa isivinini, ukulayishwa/ukulayishwa | m/s | 0.28/ 0.23 | |
| Amazinga, alayishiwe/alayishiwe | % | 6.0/12.0 | |
| Imoto nebhethri | |||
| Phakamisa amandla emoto | kw | 3.2 | |
| Shayela amandla emoto | kw | 1.3 | |
| Amandla kagesi | V | 24 | |
| I-Amphere | Ah | 180 | |
XCMG 2.5T Uphethiloli kanye LPG Forklift FGL25T
1. Injini Kadizili Eqinile Nethembekile
2. I-Wide-View Mast kanye Nensika Yesitsha Ongayikhetha
3. Uhlaka Oludidiyelwe Ngokugcwele kanye Ne-Chassis Yokumiswa
4. Uhlelo Oluhle Kakhulu Lokupholisa kanye nohlelo Lokukhipha Ukushisa
5. Kulula ukunakekela nokulungisa
6. Amandla Adonsela phansi Aphansi
7. I-Emergency Stop Switch
8. Inketho Eningi Iyatholakala Ngokukhetha
9. Itholakala ngohlu lwenjini yezimboni esebenza kahle kakhulu, itorque enkulu ngesivinini esiphansi, yenza wonke umshini uthule, ngokudlidliza okuncane nokusebenza kahle. 10. Ukusebenza kahle okuphezulu kunikezwa ngokusebenza kwama-axles, uhlelo oluhle kakhulu lwe-brake luqinisekisa ukuthi i-forklift isebenza ngokuphepha, i-axle yokuqondisa inikeza impendulo esheshayo nenembile kumshayeli lapho eqondisa.
| Imodeli | I-FG25T-JA | Idatha ye-FL25T-JA | I-FGL25T-JA | I-FL25T-JG | |
| Uhlobo lwamandla | Uphethiloli | I-LPG | Uphethiloli & LPG | I-LPG | |
| Isilinganiso Somthwalo Wokuthwala | kg | 2500 | |||
| Isikhungo Sokulayisha | mm | 500 | |||
| Kukalwe Ukuphakama Kwama-Lift | mm | 3000 | |||
| Khulula Phakamisa Ukuphakama | mm | 100 | |||
| Usayizi Wemfologo (L×W×T) | mm | 1070×125×40 | |||
| I-Mast Tilt angle (F/R, α°/β°) | deg | 6°/12° | |||
| I-Fork Overhang (Isikhungo Sesondo Sobuso Bemfoloko) | mm | 479 | |||
| Ubude obubheke ebusweni bemfologo (Ngaphandle kweFork) | mm | 2643 | |||
| Ububanzi Bebonke | mm | 1150 | |||
| I-Mast Yehlisiwe Ukuphakama | mm | 2055 | |||
| I-Mast Extended Height (Nge-Backrest) | mm | 4070 | |||
| I-Overhead Guard Height | mm | 2215 | |||
| Irediyasi Ejikayo (Ngaphandle) | mm | 2365 | |||
| Isondo (Phambili x 2) | mm | 7.00-12-12PR | |||
| Isondo (Ngemuva x 2) | mm | 6.00-9-10PR | |||
| Isisindo Esiphelele | kg | 3950 | |||
| Ibhethri | V/Ah | 12/60 | |||
| Imodeli Yenjini | K25 | I-EPA GM 3.0 | |||
| Umkhiqizi Wenjini | I-NISSAN | ||||
Sinikezela ngawo wonke amamodeli weforklift yemikhiqizo edumile yaseShayina njenge-XCMG, Heli, Hangcha, Jinjiang njalonjalo.
Uma ungathanda ukwazi imininingwane eyengeziwe kanye nemikhiqizo, sicela usithinte!
Indawo yethu yokugcina impahla1
Pakisha bese uthumela
- I-Aerial Boom Lift
- Iloli lokulahla i-China
- Cold Recycler
- I-Cone Crusher Liner
- I-Container Side Lifter
- Ingxenye ye-Dadi Bulldozer
- Okunamathiselwe kwi-Forklift Sweeper
- Izingxenye ze-Hbxg Bulldozer
- Izingxenye ze-Howo Engine
- I-Hyundai Excavator Hydraulic Pump
- Izingxenye ze-Komatsu Bulldozer
- I-Komatsu Excavator Gear Shaft
- I-Komatsu Pc300-7 Excavator Hydraulic Pump
- Izingxenye zeBulldozer ze-Liugong
- Sany Concrete Pump Spare Parts
- Izingxenye ezisele ze-Sany Excavator
- Izingxenye Zenjini ye-Shacman
- Shantui Bulldozer Clutch Shaft
- I-Shantui Bulldozer Ixhuma Iphinikhodi ye-Shaft
- Shantui Bulldozer Control Flexible Shaft
- Shantui Bulldozer Flexible Shaft
- I-Shantui Bulldozer Lifting Cylinder Repair Kit
- Izingxenye ze-Shantui Bulldozer
- Shantui Bulldozer Reel Shaft
- I-Shantui Bulldozer Reverse Gear Shaft
- Izingxenye ze-Shantui Bulldozer Spare
- Shantui Bulldozer Winch Drive Shaft
- I-Shantui Dozer Bolt
- I-Shantui Dozer Front Idler
- Ikhithi yokulungisa i-Shantui Dozer Tilt Cylinder
- I-Shantui Sd16 Bevel Gear
- I-Shantui Sd16 Brake Lining
- I-Shantui Sd16 Door Assembly
- I-Shantui Sd16 O-Ring
- I-Shantui Sd16 Track Roller
- I-Shantui Sd22 Bearing Sleeve
- I-Shantui Sd22 Friction Disc
- I-Shantui Sd32 Track Roller
- Izingxenye ze-Sinotruk Engine
- Iloli Lokudonsa
- Izingxenye ze-Xcmg Bulldozer
- Izingxenye ze-Xcmg Bulldozer Spare
- I-Xcmg Hydraulic Lock
- Ukudluliselwa kwe-Xcmg
- Izingxenye ze-Yuchai Engine
Izigaba zemikhiqizo
-
Isilayishi sesondo saseShayina se-skid steer XC740K XC750K X...
-
Isilayishi samasondo sangaphambili se-hydraulic samaShayina
-
Isitsha sifinyelela isitaki se-crane XCMG ZPMC
-
China ugandaganda wokulima wemishini yezolimo
-
XCMG 20ft 40ft 37ton esitsheni side lifter cran...
-
I-HDD yaseShayina XCMG yokubhola eqondile eqondile